.
 Pro-Tatch® Wire Winder
From Pleasant Hill Grain
.
Made in USA
Toll-Free number below for
orders or information!
ProTatch Wire Winders

Rugged construction, ease of use & superior performance have made Pro-Tatch® the best selling wire winder on the market.
The Pro-Tatch hydraulic wire winder is 100% Full-Satisfaction Guaranteed.
Over 12,000 winders in service... See for yourself why Pro-Tatch is the last word in wire winders!

ProTatch Wire Winders
Click for larger photos

Pro-Tatch wire winder quick-mounts on your choice of Cat. I, II, or III tractor hitches. Speed is adjustable with ball valve: choose full stop, creep or any operating speed.



Holds 1 mile of smooth wire or 1/2 mile of barbed wire. Unlike PTO winders, this wire winder's smooth hydraulic operation prevents even old, brittle wire from breaking. Reel is made of heavy gauge steel.

wire roller
 Click for larger photos

Three light wires, retained by D-rings before winding, are tied off to hold roll tight. Roller reel splits easily and quickly with NO binding. The Pro-Tatch winder is fast, convenient and easy to use, and it's built to last.

barbed wire fence roller

Finished rolls from the Pro-Tatch wire winder are tight, compact & easy to handle. They're also easy to pay out again if desired.

hydraulic wire winder

The Pro-Tatch winder is available with the Universal Mount shown above, instead of the 3-point mount. Price is $849.00 delivered to 48 states for the complete wire winder equipped with this Universal Mount.
 Click for larger photos

The Pro-Tatch winder is available with Bale Bed mount, as shown above, instead of the 3-point mount. Price is $825.00 delivered to 48 states for the complete wire winder equipped with this Bale Bed mount, built to fit your bale spear arm.
 Click for more details below

Fast & Easy To Use: The Pro-Tatch wire winder can be mounted and operated by one person. To wind, just park vehicle, tie a weight on far end of wire to prevent jumping (a short length of chain works well), and pull wire toward you. When reel is full, tie the roll with 4 retainer wires held by pre-drilled holes in reel-edges. The reel splits easily by spinning nut off 1" shaft, and the roll lifts away without binding. To unwind wire, tie wire to a post, set vehicle's hydraulic control lever to "float" position and drive forward to unwind.

Control Valve: Ball valve (see blue handle in photos at left) provides infinitely variable speed control. Smooth -operating valve allows you to easily select any rotational speed from fast down to creep, as well as completely stopped. Wire winder's hydraulic motor provides ample power for hard jobs like pulling barbed wire through tall grass. Even the heaviest underbrush is no match for the Pro-Tatch winder. Always regulate speed from the hydraulics on the tractor and always plug the valve hose into the power side on the hydraulics.

Large Capacity: Wire winder rolls barbed or smooth wire, or light cable. Holds 1/2 mile of barbed wire or 1 mile of smooth wire. (Click here if you need a larger winder.)

Rugged: 20" diameter, 12 gauge steel wire winder drum is virtually indestructible, and mounts on heavy duty frame constructed of 11 gauge, 3" square tube. Long life, replaceable, moly-impregnated poly bushings prevent wear to steel parts.

Unwinding: After wire has been rolled up on the Pro-Tatch winder, they can easily be put back on the spool for unwinding. Just put your hydraulic lever in "float" position and drive... the circulation of hydraulic fluid through the motor provides perfect resistance to keep the reel from overspinning. If you're using a skid steer loader without a hydraulic "float" position, you can connect the Pro-Tatch's two hose ends together (using your own adapter) for the same effect.

Mounts Available: The Pro-Tatch winder can be purchased with a 3/8"-thick steel plate Universal Mount, Bale Bed Mount, or the new quick-tach mount for 3-point tractor hitches (choose from Category I, Cat. II, or Cat. III narrow.) The new 3-point tractor hitch mount can be converted to fit a Cat. 1, 2 or 3 Narrow by simply changing the bottom pin size and configuration. Note: The Cat. 1 will include 7/8" bottom pins and no top pin (customer supplied.) The Cat. 2 will include 1-1/8" pins bottom pins and no top pin (customer supplied.) Questions on what category you might need? Cat. 1: Up to 65HP tractors. Pin size 7/8". Cat. II: 65HP to 125HP tractors. Pin size 1-1/8". Cat. III Narrow: 125HP to 200HP tractors. Pin size 1-1/8". This can vary depending on tractor manufacturer but in most cases will be accurate for what you need. Custom mounts can be fabricated with short lead time for any mounting requirements, including bale carriers and skid loaders.

Versatile: The Pro-Tatch works fine as a wire winder, cable roller, wire rope winder. Will roll up almost any kind of cable or wire, including high tensile. Also unwinds.

Free Shipping: Purchase price includes shipping by UPS to any U.S. address except Alaska and Hawaii.

Complete: Includes frame, reel, hydraulic motor, valve and hoses. Just add your style of hose ends and you're ready to roll wire.

Full Satisfaction Guarantee: Pleasant Hill Grain will refund your FULL purchase price within 30 days of purchase if you are not satisfied. This wire winder is a rugged piece of machinery that works great, and we guarantee it to be free of defects in materials and workmanship for 1 full year. Over 16,000 Pro-Tatch winders are in service, and haven't received a single unit back from a dissatisfied customer. We know you'll be pleased with this product.

 >> Wire Winder with Universal Plate Mount: Only $849.00 delivered to you!
>> Wire Winder with 3-Point Hitch Mount: Only $949.00 delivered to you!

>> Free Shipping to 48 states.
Kentucky, Nebraska, and on-site buyers please note: We must collect 5.5% state sales tax. However, for hydraulic winders and accessories picked up on-site, we also provide a 5.5% discount off the cost of the unit (and that discount applies regardless of what state you live in.)

Custom mount fabrication is available: Call or fax your individual requirements, for a price quote.
 
Yes! We will ship to Canada. Shipping to Canada usually runs $60-100 USD.
E-mail us your postal code for a fast & exact shipping quote.

ProTatch winder is made, with pride, in the USA!

I purchased the Pro Tatch this past spring and the results were excellent. We are rolling up some old line fences that are all rusty barbed wire and the Pro Tatch has made the job so much simpler. Even with the brittleness of the old wire, we are able to make compact, easy-to-handle rolls. Thank You. – Jeff Lundquist, Battle Lake, MN


Call Toll-Free to Order: 1-800-321-1073
From outside the U.S. call 1-402-725-3835
PHONE HOURS (Central Time Zone)
Monday-Thursday:
8:30 AM to 12:30 PM & 1:00 PM to 9:00 PM
Friday:
 8:30 AM to 12:30 PM & 1:00 PM to 5:00 PM
Saturday:
 8:30 AM-4:00 PM



Click here to E-mail us

Pleasant Hill Grain, 210 South 1st Street , P.O. Box 7, Hampton, Nebraska 68843-0007
Pleasant Hill Grain is a Member
of the Better Business Bureau

Visa, MasterCard, Discover, Checks
& Money Orders Accepted



Simplified Detail Drawing of Pro-Tatch Hydraulic Wire Winder

We’ve used your wire winder for 18 months and have wound up right around 1000 miles of wire. It’s done a lot of work for us and held up incredibly well. Send us a pair of bushings, and we also want to buy a second winder. – Tom Nesbitt, Fort Collins CO

Available Options




Optional wire guide: $129.00 + s/h

See below for details		 Optional (removable) solid reels can be used in place of split reel. You can keep wire on these reels until you're ready to reuse it. $77.00 + s/h


A modified solid reel is available with larger (8") diameter center for use with hi-tensile wire that will be re-used. Holds 1/2 to 3/4 mile of hi-tensile wire per reel. $82.00 + s/h 		Optional unroller arm designed for unrolling new rolls of wire. Bolts onto Pro-Tatch wire roller. Also adaptable to ATV or pickup. $179.00 + s/h

New Mega-Roller Model
Hydraulic fencing wire roller
Wire Roller Pro-Tatch Barb Wire Roller
Mega-Roller with 3/8" plate mount
$1,099.00
Mega-Roller with 3-point hitch mount
$1,099.00

Need to roll up a full mile of barbed wire? Or two miles of smooth wire?
The new Mega-Roller is now available!

Mega-Roller model is $1,099.00 with 3/8" x 16" x 16" universal steel plate mounting.
Mega-Roller model is $1,099.00 with Category II or Category III 3-point hitch.

Removal of rolled wire from the Mega-Roller is done by removing the two nuts from the right side of the right-side support arm and lifting the arm away, then removing the nut from the 1" drive shaft, and sliding off the outer roller cone. All of this this takes a little under a minute.

Call 1-800-321-1073 to order
Kentucky, Nebraska, and on-site buyers please note: We must collect 5.5% state sales tax. However, for hydraulic winders and accessories picked up on-site, we also provide a 5.5% discount off the cost of the unit (and that discount applies regardless of what state you live in.)

Yes! We will ship to Canada. Shipping to Canada usually runs $60-100 USD.
E-mail us your postal code for a fast & exact shipping quote.

Bale-Bed Model


The Pro-Tatch wire winder is available with mounting to fit your DewEze™ or other brand of bale bed. This model can be mounted on the inside or the outside of the arm and can be operated from either side of the truck.

When ordering, we need to know the outside measurements of your bale bed arm only. This will ensure you order and we send the correct fit model for your bale bed. Typical arm measurements are 3"x3" (Part #: 3x3ARM), 3"x4" (Part #: 3x4ARM), 3.5"x3.5" (Part #: 35x35ARM) and 4"x4" (Part #: 4x4ARM).

Other than the mounting style, this Pro-Tatch winder has the same performance specs as the standard unit.

The Bale Bed model is $825.00 with free shipping to 48 states.

Call 1-800-321-1073 to order

Kentucky, Nebraska, and on-site buyers please note: We must collect 5.5% state sales tax. However, for hydraulic winders and accessories picked up on-site, we also provide a 5.5% discount off the cost of the unit (and that discount applies regardless of what state you live in.)

Optional Wire Guide


The Pro-Tatch optional wire guide mounts easily on all 3-point hitch and gasoline powered models only (it does not fit on the Univ. Plate Mount or Bale-Bed models). The wire guide can be operated from either side of the wire winder and provides handy assistance to produce perfectly wound rolls.

 $129.00 + s/h.

Call 1-800-321-1073 to order

Kentucky, Nebraska, and on-site buyers please note: We must collect 5.5% state sales tax. However, for hydraulic winders and accessories picked up on-site, we also provide a 5.5% discount off the cost of the unit (and that discount applies regardless of what state you live in.)

NEW! Gasoline Powered Wire Winder
Powered by an easy-starting 5.5 HP Honda engine, the newest Pro-Tatch winder works from any platform—no hydraulics required. Clutch handles on both sides and the reversible wire-guide arm allow the user to operate from either side. As with all Pro-Tatch wire winders, operation is smooth so even old rusty wire can be spooled without frustrating breakage. The unit weighs 165 lbs.

The gas-powered Pro-Tatch winder uses the same proven split reel as the hydraulic winders, as well as the solid reels.

$1499.00 plus s/h (call 1-800-321-1073 for an economical freight quote)

$1499.00 plus s/h (call 1-800-321-1073 for an economical freight quote)

Call 1-800-321-1073 to order

Pleasant Hill Grain is a Member
of the Better Business Bureau

Pleasant Hill Grain
210 South 1st Street, P.O. Box 7
Hampton, Nebraska 68843-0007

To order call Toll Free: 1-800-321-1073 (FAX 402-725-3836)
From outside the U.S. call 1-402-725-3835

Links page at Pro-Tatch Wire Winder

Please bookmark page for future reference.

Click here to E-mail us

All contents copyright Pleasant Hill Grain. All rights reserved.
Cat: Fence Wire Roller | File: Barbed Wire Barb Wire Fence Winder | DewEze is a registered mark of Harper Industries. (alternate spelling s Dewezee, Dew Eze, DewEasy)